Click image to view full size image
1:Standard and grade:
It’s ASTM F67 standard and Grade 1 material,equivalent to:
China GB/T |
USA ASTM |
Russia TOCT |
Japan JIS |
Germany DIN |
|
Pure titanium |
TA1 |
Grade 1 |
BT1-00 |
JIS1(TP270) |
Ti1(3.7025) |
2:Chemical Composition:
Grade |
Element and Composition,% |
|||||
Grade 1 |
N,Max |
C,Max |
H,Max |
Fe,Max |
O,Max |
Titanium |
0.03 |
0.08 |
0.015 |
0.2 |
0.18 |
Balance |
|
3:Mechanical Properties
Grade |
Tensile Strength,Min |
Yield Strength,0.2% offset |
Elongation in 2 in.or 50mm,min,% |
||||||
Ksi |
Mpa |
Min |
Max |
||||||
Ksi |
Mpa |
Ksi |
Mpa |
||||||
1 |
35 |
240 |
25 |
170 |
45 |
310 |
24 |
||
4:Details:
1):Size:THK 4.75~40mm*Width Max 1000mm*Length Max 2000mm;
2):MOQ:50kgs;
3):Incoterms:FOB,C&F,CIF;
4):Payment terms:Western Union,Paypal,TT,LC;
5):Certificate:EN10204/3.1 shall be submitted to Buyer including real tested dates of Chemical Compositions and Mechanical Properties.Third party inspection is acceptable;
6):Packed by Wooden Box which is suitable for Sea or Air freight.
7):Inquiries and Orders for Medical grade titanium plates under this specification shall include the following informations:
7.1:Quantity(Weight or Number of Pieces);
7.2:Grade;
7.3:ASTM designation;
7.4:Form(it is plate);
7.5:Finish requirement:
Our medical grade titanium plates are free of injurious external and internal imperfections of a nature that will interfere with the purpose for which it is intended.Our product can be furnished as descaled or pickled,abrasive blasted,chemically milled,ground,machined,peeled,polished,or as specified by our clients.It is permissible by the standard to remove minor surface imperfections by spot grinding if such grinding does not reduce the dimension below the minimum permitted by the dimensional tolerance ordered.
7.6:Condition:
Our product is furnished in the cold-worked,annealed or stress-relieved condition.
7.7:Special requirements for tolerances
7.8:Special tests;
7.9:Special requirements for Mechanical Properties;
And other requirements.
5:FAQ
1)Q:Is it possible to get a free small piece sample to check the quality before order?
A:Yes,sure.If we have the small piece sample available at stock,we will be pleased to send you for your check.
2)Q:Is your product traceable?
A:We usually offer our product with markings on the surface of the plate somewhere.
3)Q:Can we visit you?
A:We welcome all the clients abroad or domestic to visit us,we appreciate all if you can give us some advices to make improvement during your visit.
http://www.chinatitaniums.com/
E-mail: 